Features 
materials: Poplar, pine, fir, paulownia,birch and other hardwoods

Length: can be 5.2m.  
Thickness: according to your individual requirements, the biggest thickness can be 90mm. 
Glue: MR, E2, E1  
Moisture content: ≤ 12%  

 Grade: Application: construction, furniture, room decorations，beam.

High pressure laminated

1).High pressure laminated sheets , double sides (Compact laminate) ,
    Size : 1220 mm * 2440 mm ,
    Thickness :1.8 mm , 2.0 mm , 2.2 mm , 2.5 mm …
2).High pressure laminated sheets , single side (Formica),
    Size : 1220 mm * 2440 mm , t
    Thickness : 0.5 mm , 0.6 mm , 0.7 mm , 0.8 mm , 0.9 mm
☆ Applications
   A highly versatile product.
   High impact and scratch resistance.
   It retains its appearance even when used for heavy duty
   In postforming grade, it meets all edging requirements.
☆ Species
   The flat HPL
   Metal HPL
   Compact laminate
   Anti-static HPL
   Anti-fungus HPL
   Obstruct burning HPL
   Extended product

MDF

Specifications

Size: 1220mm x 2440mm,1830mm x 3660mm and other special sizes according to our clients' requirements.
Thickness: 2.5mm -- 18mm
Glue: MR glue, E0 glue, E1 glue, E2 glue
Density(kg/m3): approx 750
Properties
Moisture(%): 4-13
Density tolerance(%): +/-7.0
Modulus of inner combination(MPA): 0.45
Modulus of surface combination(MPA):>=1.2
Modulus of rupture (MOR) 24(MPA) static bending strength: 20
Formaldehyde emission level:
E0 Average under 0.5mg/L. i.e. under 3mg per 100g
E1 Average under 1.5mg/L. i.e.under 9mg per 100g
E2 Average under 5mg/L.i.e.under 30mg per 100g
Surface: sanding / pressed
Screw holding face: 1300N
Screw holding edge: 800N

☆ Uses
It may be used to make display cabinets, wall-panels and storage units. It’s also Widely used for furniture, indoors decoration, etc

☆ Adavantages
1).It is dense, flat, stiff, has no knots and is easily machined.
2).Because it is made up of fine particles it does not have an easily recognisable surface grain.
3).It can be painted to produce a smooth quality surface.
4).It have low "tear out," which means that when sawed, the end has a smooth cut instead of a jagged edge. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products.
5).MDF have good density profile with high bending strength and modulus of elasticity, dimension stability.
6).The MDF also with low formaldehyde content, smooth stable surface of MDF make it an ideal substrate for surfacing with decorative paper or PVC foils and direct painting.

1. MELAMINE + MDF
About the product
Melamine is a thermo-fused panel product. Decorative paper is saturated with melamine resin and partially cured. The paper formation is similar
to that of high pressure laminates. Final curing occurs at the time of hot press lamination. A permanent bond is formed as the resin of the paper flows into the surface of the board.
Features
Highly durable and versatile. Easy to maintain. Cost effective because panels are finished, ready for machining. Less labor than laying up high pressure laminates, yet gives the same appearance. Melamine panels will not de-laminate.
Melamine faced board -The economical decorative boardApplications:
.1)Economical and aesthetic.
.2)The ideal interior fitting solution for furniture and partitioning

2. Fancy veneer + MDF

Sources:
Sliced veneers gluing together side to side before pressing them on MDF, which made from fibres of wood bonded together with resin under pressure.
A. Size:4'x8',3'x7', 3.0,3.5,4.8,5.2,6,15,18mm;
B. Species:
1. North American: Red Oak, White Oak, Cherry,Black Walnut, Hard Maple,
2. Africa: Sapele, Zingana, Eyong,Anegre,Makore;
3. Europe: White Beech, Steam Beech;
4. Asia: Burma Teak, White Oak, Ash, Cherry,
5. The other species not listed above under requested.
C. Laminated Veneer: Standard 0.15,0.2,0.25,0.3,0.5mm also available;
D. Wood Cut: quarter cut, crown cut;
E. Matched: book matched, slip matched;
F. Glue:E2,WBP,E1;
G. Grade: 1-side:AA Grade; 2-sides: AA grade on face & AB grade on reverse;
H. Core Board: Raw MDF Board.

Practical board

Face: Plain or Melamine Faced
Core: Poplar and Hardwood / Pine and Hardwood
Size: 1220x2440mm and other special sizes according to our clients' requirements.
Thickness: 9 -- 30mm .
Glue: MR, E0,E1, E2 .
MR glue
Density:550-850㎏/m3
Tolerance of density: ≤±5.0%
Diagonal tolerance:≤5mm
Intensity:≥0.35 Mpa
Moisture:5-11%
Formaldehyde emission:≤30mg/100g
Swell rate:< 10%
Exterior structure intensity:≥0.95 Mpa
Bending strength (kg/cm2):180,150
Internal bond (kg/cm2):4,3

☆ Species
1.Normal density particle board
2.Medium density particle board:550-850kg/m3
3.High-density particle board
Melamine formaldehyde glues are not extensively used for plywood gluing but are used where a high-grade bond is required, and where black phenolic glues cannot be tolerated. They are used to fortified urea-formaldehyde glues to increase the weathering resistance of the bond. The largest application of the melamine formaldehyde resin is in the production of decorative overlays.
Urea formaldehyde glues are extensively used for interior and intermediate grade bonding, which covers the majority of hardwood plywood produced. Formulas differ somewhat and can be adapted to meet specific conditions.
WBP glue
Phonic-formaldehyde glues are standard for exterior bonds. With a glue properly formulated for exterior use and suitably employed, no exposure conditions or laboratory testes are known which will degrade hot pressed phenolic glue bonds without destroying the adjacent wood layers. Phenolic glues are also used for impregnating veneers and paper overlays for plywood.
Properties

☆ Uses
It is often used for kitchen tops (which are laminated with melamine) and fire doors,mounting, backing, book making, and constructing. a timber substitute in furniture. Flush doors, tabletops, chair seats.?Chipboard with a veneered surface is widely used for flat-pack furniture and work surfaces.

☆ Advantages
Particle board is cheaper, denser and more uniform than conventional wood and plywood and is substituted for them when appearance and strength are less important than cost. However, particle board can be made more attractive by painting or the use of wood veneers that are glued onto surfaces that will be visible. particle board over veneer core plywood is its dimensional consistency and stability.

☆ Disadvantages
All grades of chipboard except the high-density variety tend to soak up water. Once it is water logged, chipboard tends to swell and breakdown. Though it is more dense than conventional wood, it is the lightest and weakest type of fiberboard, except for insulation board. Medium-density fibreboard and hardboard, also called high-density fiberboard, are stronger and denser than particle board. A major disadvantage of particle board is that it is very prone to expansion and discoloration due to moisture, particularly when it is not covered with paint or another sealer. Therefore, it is rarely used outdoors or places that have high levels of moisture, with the exception of some bathrooms, kitchens and laundries, where it is commonly used as an underlayment beneath a continuous sheet of vinyl floor covering. In such an installation the edges must be properly coved upward against the wall and joins and non-coved edges must properly sealed against moisture penetration.

Flooring

We can supply all kinds of wooden flooring as below,
1,solid wood flooring
A, size: 610/910x92/125x18mm or random length;
B, T&G: according to your individual requirements;
C, painting: prefinished or unfinished, TREFFERT ceramic & anti scratch painting, 7 to 10 layers;
D, moisture content: 8-12%;
E, bevel and other design: according to buyers' requirements;
F, species: JATOBA, WHITE OAK, KAMPASS, SAPELLI, IPE, OKAN, and etc.

2, engineer flooring
A, size: 125/194x910/1200x13/14/15(1/2/3)mm or other required size;
B, T&G: according to your individual requirements;
C, painting: prefinished or unfinished, TREFFERT ceramic & anti scratch painting, 7 to 10 layers;
D, moisture content: 8-12%;
E, bevel and other design: according to buyers' requirements;
F, top species: JATOBA, WHITE OAK, KAMPASS,  WALNUT, CHERRY, MAPLE,  SAPELLI,  IPE, OKAN, and etc.
G,baseboard: birch,hardwood, eculyptus, poplar, meranti, okoume 

3, laminated flooring
A, size: 120/150/185x910/1500x7/8/12mm or other required size;
B, T&G: according to your individual requirements;
C, painting: prefinished or unfinished, TREFFERT ceramic & anti scratch painting, 7 to 10 layers;
D, moisture content: 8-12%;
E, bevel and other design: according to buyers' requirements;
F, paper design: all kinds single color or wooden grain.